Interested in becoming an Aqua Meds Dealer? Find out how Aqua Meds® can help your customers.

Instructions

Terminate

Instructions:

  1. Determine your pond water capacity
  2. If applicable turn off UV sterilizer for 48 hours after application
  3. For the first application for the season mix two ounces (2 scoops)of Sludge Remover per 1,000 gallons in a bucket with several gallons of pond water.
  4. Disperse mixture into areas of the pond with adequate circulation
  5. Reapply one ounce (1 scoop) per 1,000 gallons every other week
  6. Maintain sufficient aeration during treatment
  7. Discontinue use when water temperature drops below 50 degrees F (10 degrees C)

Note: One “scoop” equals one ounce. If you have a pond smaller than 1,000 here’s the dosage:

1/4 scoop will treat 250 gallons

1/2 scoop will treat 500 gallons

3/4 scoop will treat 750 gallons

Do not worry about over dozing, Aqua Meds Sludge Remover is 100% natural.